English 
 |
Machine Introduction
alling film vacuum evaporator is a kind of new high-efficiency evaporator that carries out falling film evaporation under vacuum . applicable to the concentration of milk , fruit juice ,traditional Chinese medicine ,western medicine ,glucose ,starch , monosodium glutamate ,chemical industry and so on . It is especially suitable for low viscosity heating sensitive materials
Technical Parameter
| Model | GS-500 | GS-1000 | GS-1500 | GS-2000 | GS-2500 | |
|---|---|---|---|---|---|---|
Evaporated capacity (kg/h) |
500 | 1000 | 1500 | 2000 | 2500 | |
Steam pressure (Mpa) | 0.05-0.09 | 0.05-0.09 |
0.05-0.09 | 0.05-0.09 | 0.05-0.09 | |
Evaporated temperature (℃) | Single effect | 80-90 | 85-90 | 85-90 | 85-90 | 85-90 |
Evaporated temperature (℃) | Double effect | 65-75 | 65-75 | 65-75 | 65-75 | 65-75 |
Evaporated temperature (℃) | Three effect | 55-60 | 55-60 | 55-60 | 55-60 | 55-60 |
Vacuum degree (Mpa) | Single effect | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 |
Vacuum degree (Mpa) | Double effect | 0.06 | 0.06 | 0.06 | 0.06 | 0.06 |
Vacuum degree (Mpa) | Three effect | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 |
Concentrated rate | 1.35 | 1.35 | 1.35 | 1.35 | 1.35 | |
Steam consumption (Kg/h) | 230 | 350 | 600 | 750 | 1000 | |
recycle water(T) | 5 | 8 | 15 | 20 | 25 | |
Steam Inlet Φ | 32 | 43 | 57 | 76 | 89 | |
Vacuum tube Φ | 80 | 109 | 159 | 219 | 259 | |
Dimension | 5.4*1.0*2.8 | 7.0*1.5*3.4 | 8.25*1.6*3.6 | 8.35*1.65*3.8 | 8.5*1.7*4.0 | |
Characteristic
(1) Multiple functions: this evaporator can reclaim materials repetitively with the circulation of the frst effect, thesecond effect, and the third effect. Materials can be fed into for concentration continuously or at intervals.
(2) All parts contacting materials, secondary steam, and condensed water are made of high-quality stainless steelwhich conforms to GMP standard requirements, The appearance is beautiful., The heater and evaporator areprovided with a heat preservation structure covered by a stainless sheet with its surface mirror-polished or mattetreated.
(3) The heating chamber is of the floor stand type, so the device is beautiful and easy to install, operate, and repair. Aliguid ring pump is used to generate a vacuum. The pump is featured by high vacuum degree, low consumption ofwater and power supply, small space, sound working environment, and low noise.
(4) The advanced design can not only prevent backflow leading to repeat heating of material but also avoid burntmaterial sticking to the inner side of the pipe.
(5) Advanced hot pressure pump is used. lts steam pressure (gauge pressure) is 0.8MPa, andthe extraction coeffcient is 0.98. Therefore, the steam consumption and noise are low.
(6) Advanced structure makes the vacuum degree of the working system very stable.
